Beautiful Idiomatic Python

By: summonagus ● at Aug. 8, 2017, 6:13 a.m. ● and modified at Aug. 8, 2017, 6:13 a.m.
Posted under: #Tricks, #Beginner ● Your ip address: 23.20.129.162 ● views: 73 times.

AD Space Available, Book Now!

Transforming Code into Beautiful, Idiomatic Python: notes from Raymond Hettinger's talk at pycon US 2013. The code examples and direct quotes are all from Raymond's talk. I've reproduced them here for my own edification and the hopes that others will find them as handy as I have!


Transforming Code into Beautiful, Idiomatic Python

Notes from Raymond Hettinger's talk at pycon US 2013 video, slides and pycon US 2015 video

The code examples and direct quotes are all from Raymond's talk. I've reproduced them here for my own edification and the hopes that others will find them as handy as I have!

Looping over a range of numbers

for i in [0, 1, 2, 3, 4, 5]:
    print i**2

for i in range(6):
    print i**2

Better

for i in xrange(6):
    print i**2

xrange creates an iterator over the range producing the values one at a time. This approach is much more memory efficient than range. xrange was renamed range in python 3.

Looping over a collection

colors = ['red', 'green', 'blue', 'yellow']

for i in range(len(colors)):
    print colors[i]

Better

for color in colors:
    print color

Looping backwards

colors = ['red', 'green', 'blue', 'yellow']

for i in range(len(colors)-1, -1, -1):
    print colors[i]

Better

for color in reversed(colors):
    print color

Looping over a collection and indices

colors = ['red', 'green', 'blue', 'yellow']

for i in range(len(colors)):
    print i, '--->', colors[i]

Better

for i, color in enumerate(colors):
    print i, '--->', color

It's fast and beautiful and saves you from tracking the individual indices and incrementing them.

Whenever you find yourself manipulating indices [in a collection], you're probably doing it wrong.

Looping over two collections

names = ['raymond', 'rachel', 'matthew']
colors = ['red', 'green', 'blue', 'yellow']

n = min(len(names), len(colors))
for i in range(n):
    print names[i], '--->', colors[i]

for name, color in zip(names, colors):
    print name, '--->', color

Better

for name, color in izip(names, colors):
    print name, '--->', color

zip creates a new list in memory and takes more memory. izip is more efficient than zip.

Looping in sorted order

colors = ['red', 'green', 'blue', 'yellow']

# Forward sorted order
for color in sorted(colors):
    print colors

# Backwards sorted order
for color in sorted(colors, reverse=True):
    print colors

Custom Sort Order

colors = ['red', 'green', 'blue', 'yellow']

def compare_length(c1, c2):
    if len(c1) < len(c2): return -1
    if len(c1) > len(c2): return 1
    return 0

print sorted(colors, cmp=compare_length)

Better

print sorted(colors, key=len)

The original is slow and unpleasant to write. Also, comparison functions are no longer available in python 3.

Call a function until a sentinel value

blocks = []
while True:
    block = f.read(32)
    if block == '':
        break
    blocks.append(block)

Better

blocks = []
for block in iter(partial(f.read, 32), ''):
    blocks.append(block)

iter takes two arguments. The first you call over and over again and the second is a sentinel value.

Distinguishing multiple exit points in loops

def find(seq, target):
    found = False
    for i, value in enumerate(seq):
        if value == target:
            found = True
            break
    if not found:
        return -1
    return i

Better

def find(seq, target):
    for i, value in enumerate(seq):
        if value == target:
            break
    else:
        return -1
    return i

Inside of every for loop is an else.

Looping over dicitonary keys

d = {'matthew': 'blue', 'rachel': 'green', 'raymond': 'red'}

for k in d:
    print k

for k in d.keys():
    if k.startswith('r'):
        del d[k]

When should you use the second and not the first? When you're mutating the dictionary.

If you mutate something while you're iterating over it, you're living in a state of sin and deserve what ever happens to you.

d.keys() makes a copy of all the keys and stores them in a list. Then you can modify the dictionary.

Looping over dicitonary keys and values

# Not very fast, has to re-hash every key and do a lookup
for k in d:
    print k, '--->', d[k]

# Makes a big huge list
for k, v in d.items():
    print k, '--->', v

Better

for k, v in d.iteritems():
    print k, '--->', v

iteritems() is better as it returns an iterator.

Construct a dictionary from pairs

names = ['raymond', 'rachel', 'matthew']
colors = ['red', 'green', 'blue']

d = dict(izip(names, colors))
# {'matthew': 'blue', 'rachel': 'green', 'raymond': 'red'}

Counting with dictionaries

colors = ['red', 'green', 'red', 'blue', 'green', 'red']

# Simple, basic way to count. A good start for beginners.
d = {}
for color in colors:
    if color not in d:
        d[color] = 0
    d[color] += 1

# {'blue': 1, 'green': 2, 'red': 3}

Better

d = {}
for color in colors:
    d[color] = d.get(color, 0) + 1

# Slightly more modern but has several caveats, better for advanced users
# who understand the intricacies
d = defaultdict(int)
for color in colors:
d[color] += 1

Grouping with dictionaries -- Part I and II

names = ['raymond', 'rachel', 'matthew', 'roger',
         'betty', 'melissa', 'judith', 'charlie']

# In this example, we're grouping by name length
d = {}
for name in names:
    key = len(name)
    if key not in d:
        d[key] = []
    d[key].append(name)

# {5: ['roger', 'betty'], 6: ['rachel', 'judith'], 7: ['raymond', 'matthew', 'melissa', 'charlie']}

d = {}
for name in names:
    key = len(name)
    d.setdefault(key, []).append(name)

Better

d = defaultdict(list)
for name in names:
    key = len(name)
    d[key].append(name)

Is a dictionary popitem() atomic?

d = {'matthew': 'blue', 'rachel': 'green', 'raymond': 'red'}

while d:
    key, value = d.popitem()
    print key, '-->', value

popitem is atomic so you don't have to put locks around it to use it in threads.

Linking dictionaries

defaults = {'color': 'red', 'user': 'guest'}
parser = argparse.ArgumentParser()
parser.add_argument('-u', '--user')
parser.add_argument('-c', '--color')
namespace = parser.parse_args([])
command_line_args = {k:v for k, v in vars(namespace).items() if v}

# The common approach below allows you to use defaults at first, then override them
# with environment variables and then finally override them with command line arguments.
# It copies data like crazy, unfortunately.
d = defaults.copy()
d.update(os.environ)
d.update(command_line_args)

Better

d = ChainMap(command_line_args, os.environ, defaults)

ChainMap has been introduced into python 3. Fast and beautiful.

Improving Clarity

  • Positional arguments and indicies are nice
  • Keywords and names are better
  • The first way is convenient for the computer
  • The second corresponds to how human’s think

Clarify function calls with keyword arguments

twitter_search('@obama', False, 20, True)

Better

twitter_search('@obama', retweets=False, numtweets=20, popular=True)

Is slightly (microseconds) slower but is worth it for the code clarity and developer time savings.

Clarify multiple return values with named tuples

# Old testmod return value
doctest.testmod()
# (0, 4)
# Is this good or bad? You don't know because it's not clear.

Better

# New testmod return value, a namedTuple
doctest.testmod()
# TestResults(failed=0, attempted=4)

A namedTuple is a subclass of tuple so they still work like a regular tuple, but are more friendly.

To make a namedTuple:

TestResults = namedTuple('TestResults', ['failed', 'attempted'])

Unpacking sequences

p = 'Raymond', 'Hettinger', 0x30, 'python@example.com'

# A common approach / habit from other languages
fname = p[0]
lname = p[1]
age = p[2]
email = p[3]

Better

fname, lname, age, email = p

The second approach uses tuple unpacking and is faster and more readable.

Updating multiple state variables

def fibonacci(n):
    x = 0
    y = 1
    for i in range(n):
        print x
        t = y
        y = x + y
        x = t

Better

def fibonacci(n):
    x, y = 0, 1
    for i in range(n):
        print x
        x, y = y, x + y

Problems with first approach

  • x and y are state, and state should be updated all at once or in between lines that state is mis-matched and a common source of issues
  • ordering matters
  • it's too low level

The second approach is more high-level, doesn't risk getting the order wrong and is fast.

Simultaneous state updates

tmp_x = x + dx * t
tmp_y = y + dy * t
tmp_dx = influence(m, x, y, dx, dy, partial='x')
tmp_dy = influence(m, x, y, dx, dy, partial='y')
x = tmp_x
y = tmp_y
dx = tmp_dx
dy = tmp_dy

Better

x, y, dx, dy = (x + dx * t,
                y + dy * t,
                influence(m, x, y, dx, dy, partial='x'),
                influence(m, x, y, dx, dy, partial='y'))

Efficiency

  • An optimization fundamental rule
  • Don’t cause data to move around unnecessarily
  • It takes only a little care to avoid O(n**2) behavior instead of linear behavior

Basically, just don't move data around unecessarily.

Concatenating strings

names = ['raymond', 'rachel', 'matthew', 'roger',
         'betty', 'melissa', 'judith', 'charlie']

s = names[0]
for name in names[1:]:
    s += ', ' + name
print s

Better

print ', '.join(names)

Updating sequences

names = ['raymond', 'rachel', 'matthew', 'roger',
         'betty', 'melissa', 'judith', 'charlie']

del names[0]
# The below are signs you're using the wrong data structure
names.pop(0)
names.insert(0, 'mark')

Better

names = deque(['raymond', 'rachel', 'matthew', 'roger',
               'betty', 'melissa', 'judith', 'charlie'])

# More efficient with deque
del names[0]
names.popleft()
names.appendleft('mark')

Decorators and Context Managers

  • Helps separate business logic from administrative logic
  • Clean, beautiful tools for factoring code and improving code reuse
  • Good naming is essential.
  • Remember the Spiderman rule: With great power, comes great responsibility!

Using decorators to factor-out administrative logic

# Mixes business / administrative logic and is not reusable
def web_lookup(url, saved={}): if url in saved:
        return saved[url]
    page = urllib.urlopen(url).read()
    saved[url] = page
    return page

Better

@cache
def web_lookup(url):
    return urllib.urlopen(url).read()

Factor-out temporary contexts

# Saving the old, restoring the new
old_context = getcontext().copy()
getcontext().prec = 50
print Decimal(355) / Decimal(113)
setcontext(old_context)

Better

with localcontext(Context(prec=50)):
    print Decimal(355) / Decimal(113)

How to open and close files

f = open('data.txt')
try:
    data = f.read()
finally:
    f.close()

Better

with open('data.txt') as f:
    data = f.read()

How to use locks

# Make a lock
lock = threading.Lock()

# Old-way to use a lock
lock.acquire()
try:
    print 'Critical section 1'
    print 'Critical section 2'
finally:
    lock.release()

Better

# New-way to use a lock
with lock:
    print 'Critical section 1'
    print 'Critical section 2'

Factor-out temporary contexts

try:
    os.remove('somefile.tmp')
except OSError:
    pass

Better

with ignored(OSError):
    os.remove('somefile.tmp')

ignored is is new in python 3.4, documentation.

To make your own ignored context manager in the meantime:

@contextmanager
def ignored(*exceptions):
    try:
        yield
    except exceptions:
        pass

Stick that in your utils directory and you too can ignore exceptions

Factor-out temporary contexts

# Temporarily redirect standard out to a file and then return it to normal
with open('help.txt', 'w') as f:
    oldstdout = sys.stdout
    sys.stdout = f
    try:
        help(pow)
    finally:
        sys.stdout = oldstdout

Better

with open('help.txt', 'w') as f:
    with redirect_stdout(f):
        help(pow)

redirect_stdout is proposed for python 3.4, bug report.

To roll your own redirect_stdout context manager

@contextmanager
def redirect_stdout(fileobj):
    oldstdout = sys.stdout
    sys.stdout = fileobj
    try:
        yield fieldobj
    finally:
        sys.stdout = oldstdout

Concise Expressive One-Liners

Two conflicting rules:

  • Don’t put too much on one line
  • Don’t break atoms of thought into subatomic particles

Raymond’s rule:

  • One logical line of code equals one sentence in English

List Comprehensions and Generator Expressions

result = []
for i in range(10):
s = i ** 2
    result.append(s)
print sum(result)

Better

print sum(i**2 for i in xrange(10))

First way tells you what to do, second way tells you what you want.

Adapter Classes

Learn to recognize non-pythonic APIs and to recognize good code. Here are a few pointers to help you identify opportunities to utilze an adapter class

  • Avoid unnecessary packaging in favor of simpler imports
  • Create custom exceptions
  • Use properties instead of getter methods
  • Create a context manager for recurring set-up and teardown logic
  • Use magic methods:
    • _len_ instead of getSize()
    • _getitem_ instead of getRouteByIndex()
    • make the table iterable
    • Add good _repr_ for better debuggability
import jnettool.tools.elements.NetworkElement
import jnettool.tools.Routing

class NetworkElementError(Exception):
    pass

class NetworkElement(object):
    
    def __init__(self, ipaddr):
        self.ipaddr = ipaddr
        self.oldne = jnettool.tools.elements.NetworkElement(ipaddr)

    @property
    def routing_table(self):
        try:
            return RoutingTable(self.oldne.getRoutingTable())
        except jnettool.tools.elements.MissingVar:
            raise NetworkElementError('No routing table found')

    def __enter__(self):
        return self

    def __exit__(self, exctype, excinst, exctb):
        if exctype == NetworkElementError:
            logging.exception('No routing table found')
            self.oldne.cleanup('rollback')
        else:
            self.oldne.cleanup('commit')
        self.oldne.disconnect()

    def __repr__(self):
        return '%s(%r)' % (self.__class__.__name__, self.ipaddr)


class RoutingTable(object):
    
    def __init__(self, oldrt):
        self.oldrt = oldrt
    
    def __len__(self):
        return self.oldrt.getSize()
    
    def __getitem__(self, index):
        if index >= len(self):
            raise IndexError
        return Route(self.oldrt.getRouteByIndex(index))


class Route(object):
    
    def __init__(self, old_route):
        self.old_route = old_route
    
    @property
    def name(self):
        return self.old_route.getName()
    
    @property
    def ipaddr(self):
        return self.old_route.getIPAddr()

Here is a sample of using the above class

from nettools import NetworkElement

with NetworkElement('127.0.0.1') as ne:
    for route in ne.routing_table:
       print '{} --> {}'.format(route.name, route.ipaddress)
Author

summonagus

Python Developer, Linux Enthusiast, and Senior writer at python.web.id
Website: https://github.com/agusmakmun
blog comments powered by Disqus